Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pipe thread sealant
- Tape measure
- Gas leak detection solution
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation, away from combustible materials and with access to gas and electrical connections.
- Remove Packaging Materials: Remove all shipping materials, protective films, and tape from the gas range.
- Gas Connection: Connect to gas supply using approved flexible gas connector. Apply pipe thread sealant to all connections.
- Check for Leaks: Apply gas leak detection solution to all connections. If bubbles appear, there is a leak - tighten connections and retest.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, AC outlet. Do not use an extension cord.
- Level the Range: Adjust the leveling legs to ensure the range is level from front to back and side to side.
- Test Operation: Test all burners and oven functions to ensure proper operation before regular use.
Specifications
| Model Series | WGRP789HT |
| Type | Freestanding Gas Range |
| Color | Stainless Steel / Black |
| Burner Configuration | 5 Burners (including Power Burner) |
| Burner BTU Ratings | Front: 15,000 BTU, Rear: 9,500 BTU each |
| Oven Capacity | 5.8 cu. ft. |
| Control Type | Knob Controls with Digital Display |
| Energy Source | Natural Gas or LP (Convertible) |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 47 x 30 x 28 inches |
| Weight | 145 lbs |
| Oven Cleaning | Self-Cleaning |
Warranty Information
- Full Warranty: 1 year parts and labor
- Burner Warranty: 5 years on sealed burners
- Oven Warranty: 10 years on oven cavity
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Power Burner
15,000 BTU power burner provides rapid boiling and high-heat cooking capabilities, perfect for large pots and quick meal preparation.
Precise Simmer Burner
Specialized simmer burner maintains low, consistent heat for delicate sauces, melting chocolate, and keeping food warm without burning.
Even-Heat True Convection
Third heating element and fan circulate hot air evenly throughout the oven cavity, eliminating hot spots and ensuring consistent baking results.
Self-Cleaning Oven
High-temperature cleaning cycle reduces baked-on spills to ash, making oven cleaning quick and effortless with no harsh chemicals needed.
FlameSelect™ Burners
Precise flame control with visual indicators allows for exact temperature settings from low simmer to high boil for perfect cooking results.
Storage Drawer
Insulated storage drawer keeps cooked foods warm or provides convenient storage for pots, pans, and baking sheets.
Cooking Functions Explained
Convection Bake
Even heating for perfect baking results with multiple racks
Convection Roast
Crispy exterior with juicy interior for meats and poultry
Proof
Low temperature setting ideal for dough rising
Warm
Keeps cooked foods at serving temperature
Broil
High heat from above for browning and crisping
Self Clean
High-temperature cleaning cycle for oven interior
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner won't light | Gas supply off, clogged burner ports, faulty igniter | Check gas supply, clean burner ports, check igniter spark |
| Uneven flame | Clogged burner ports, improper air mixture | Clean burner ports, adjust air shutter if accessible |
| Oven not heating | Power issue, faulty igniter, gas supply problem | Check power supply, verify gas supply, check oven igniter |
| Gas odor | Gas leak, improper combustion | Immediately turn off gas, ventilate area, check for leaks |
| Self-clean not working | Door not locked, faulty lock mechanism | Ensure door is fully closed and locked, check lock mechanism |
| Digital display not working | Power issue, control board failure | Check power supply, reset circuit breaker, contact service |
Error Codes
- F1: Oven temperature sensor failure - Contact service center
- F2: Oven over-temperature - Allow to cool, check for obstructions
- F3: Door lock failure during clean cycle - Check door lock mechanism
- F4: Ignition failure - Check gas supply and igniter
- F5: Control board communication error - Reset power, contact service
- F7: Shorted keypad - Clean control panel, check for moisture
Manual Downloads
Current Model Manuals
WGRP789HT
30" Gas Range with Convection
WGRP690HT
30" Gas Range Air Fry
WGRP890HT
36" Pro-Style Gas Range
WGRP450HT
30" Basic Gas Range
Popular Previous Models
WGRP565HT
30" Gas Range with Griddle
WGRP340HT
30" Gas Range Self-Clean
WGRP220HT
30" Gas Range White
WGRP180HT
30" Gas Range Black