Installation Guide
Tools Needed:
- Adjustable wrench
- Screwdrivers (flat and Phillips)
- Level
- Water pressure gauge
- Teflon tape
Step-by-Step Installation
- Choose Installation Location: Select a location with proper ventilation and away from heat sources. Ensure level flooring.
- Water Line Connection: Connect to a cold water supply line with proper shut-off valve. Use copper or plastic water line.
- Electrical Connection: Connect to a dedicated 115V, 60Hz grounded outlet. Do not use extension cords.
- Level the Unit: Adjust leveling legs to ensure proper operation and prevent vibration.
- Water Pressure Check: Verify water pressure is between 20-120 psi for optimal performance.
- Initial Setup: Flush water line for 3 minutes to clear debris before connecting to ice maker.
- Test Run: Run through initial ice making cycle to check for leaks and proper operation.
Specifications
| Model Series | Various Whirlpool Ice Maker Models |
| Type | Automatic Ice Maker |
| Ice Production | 4-25 lbs per day (varies by model) |
| Storage Capacity | 3-15 lbs (varies by model) |
| Ice Type | Cubes, Crushed, or Both |
| Water Connection | 1/4" copper or plastic supply line |
| Water Pressure | 20-120 psi |
| Power Requirements | 115V, 60Hz, 2.5A |
| Dimensions (HxWxD) | Varies by model |
| Operating Temperature | 45°F - 110°F |
| Refrigerant Type | R134a or R600a |
Warranty Information
- Full Warranty: 1 year parts and labor
- Sealed System Warranty: 5 years on compressor and evaporator
- Ice Maker Warranty: 2 years on ice making assembly
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Automatic Shut-off
Built-in sensor automatically stops ice production when bin is full, preventing overflow and conserving energy.
Quick Ice Production
Advanced freezing technology produces ice quickly, with some models making first batch in as little as 15 minutes.
Dual Ice Options
Select models offer both cubed and crushed ice options with easy selection controls for versatile use.
Clean Ice Indicator
Reminder system alerts when it's time to clean the ice maker for optimal performance and hygiene.
Energy Efficient
Designed to meet ENERGY STAR® requirements with efficient insulation and compressor technology.
Easy Clean Design
Removable ice bin and accessible components make cleaning and maintenance simple and convenient.
Ice Making Process Explained
Water Fill
Water valve opens to fill ice mold with precise amount of water
Freezing Cycle
Refrigerant cools mold to freeze water into solid ice cubes
Harvesting
Heating element warms mold to release ice cubes into storage bin
Bin Check
Sensor checks if bin is full before starting next cycle
Crushing Option
Crusher mechanism activates when crushed ice is selected
Auto Restart
System automatically resumes after power interruption
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No ice production | Water supply issue, power problem, switch off | Check water supply and power, ensure ice maker switch is ON |
| Small or thin ice cubes | Low water pressure, clogged filter, water valve issue | Check water pressure, replace water filter, inspect water valve |
| Ice tastes or smells bad | Old water filter, contaminated water supply | Replace water filter, check water source quality |
| Ice maker leaking | Loose connections, cracked water line, overfilling | Check all connections, inspect water line, adjust fill time |
| Loud noises during operation | Ice jam, loose components, fan obstruction | Clear ice jam, tighten components, check fan area |
| Ice cubes stuck together | Temperature fluctuations, infrequent use | Maintain consistent temperature, use ice regularly |
| Ice maker runs continuously | Faulty shut-off arm, sensor malfunction | Check shut-off arm movement, test bin sensor |
| Water in ice bin | Incomplete freezing, warm temperatures | Check freezer temperature, ensure proper ventilation |
Error Codes & Indicators
- No Power Light: Check electrical connection and circuit breaker
- Red Warning Light: Service required - contact authorized technician
- Flashing Ice Icon: Ice bin full or sensor issue
- Water Drop Icon: Water filter needs replacement
- Continuous Beeping: Door ajar or temperature warning
- No Display: Power supply issue or control board failure
Preventive Maintenance
- Clean ice maker every 6 months with manufacturer-approved cleaner
- Replace water filter every 6 months or as recommended
- Check water line connections annually for leaks
- Clean condenser coils every 12 months
- Sanitize ice storage bin monthly
- Check door seals for proper closure
Manual Downloads
Popular Whirlpool Ice Maker Models
WUI75X15HW
15" Built-in Ice Maker
WUI55X15HW
15" Countertop Ice Maker
WUI90X20HW
20" Undercounter Ice Maker
WUI45X10HW
10" Portable Ice Maker
Refrigerator with Ice Maker Models
WRX735SDHZ
French Door with Ice Maker
WRQA59CNKZ
Side-by-Side with Ice Maker
WRS571CIHZ
Bottom Freezer with Ice Maker
WRB322DMBM
Top Freezer with Ice Maker
Troubleshooting Guides
Ice Maker Repair Guide
Comprehensive repair manual
Water Filter Guide
Filter replacement instructions
Cleaning Instructions
Step-by-step cleaning guide
Installation Manual
Complete installation guide