Whirlpool Gas Stove

User Manual & Installation Guide

5 Burner Gas Cooktop

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Gas leak detector solution
  • Screwdrivers (flat and Phillips)
  • Pipe thread sealant tape
  • Level

Step-by-Step Installation

  1. Choose Installation Location: Select a location with proper ventilation, away from flammable materials and with adequate clearance from overhead cabinets.
  2. Remove Packaging Materials: Remove all protective films, tapes, and packaging materials from the gas stove.
  3. Gas Connection: Connect the gas supply line to the stove's gas inlet using an approved flexible gas connector. Apply pipe thread sealant to connections.
  4. Check for Leaks: Apply gas leak detector solution to all connections. If bubbles form, there is a leak - tighten connections and retest.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz outlet for electronic ignition system. Do not use an extension cord.
  6. Level the Stove: Adjust the leveling legs to ensure the stove is perfectly level from front to back and side to side.
  7. Test Operation: Test all burners and the oven to ensure proper ignition and flame characteristics.
Warning: Gas appliance installation must be performed by a qualified technician in accordance with local codes and regulations to ensure safety and maintain warranty coverage.

Specifications

Model Series WGS560SLX
Type Freestanding Gas Range
Color Stainless Steel / Black Glass
Burner Configuration 5 Burners (Various Sizes)
Oven Capacity 5.3 cu. ft.
Control Type Knob Controls with Electronic Ignition
Energy Source Natural Gas or LP (Convertible)
Burner Output 15,000 BTU (Power Burner)
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 36 x 30 x 28 inches
Weight 145 lbs
Warranty 1 Year Full, 5 Years Burner Warranty

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Burner Warranty: 5 years on sealed burners
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Power Burner

15,000 BTU burner provides rapid boiling and high-heat cooking capabilities for professional-style cooking results.

Simmer Burner

Precise low-heat burner maintains consistent temperatures for delicate sauces, melting chocolate, and simmering without scorching.

Sealed Burners

Spill-proof sealed burners prevent food and liquids from dripping into the stove, making cleanup quick and easy.

Electronic Ignition

Reliable electronic ignition system eliminates the need for matches or lighters, providing consistent sparking for easy burner lighting.

Continuous Grates

One-piece continuous cast iron grates allow easy movement of heavy cookware across the cooktop surface without lifting.

Convection Oven

True convection cooking with a third heating element and fan circulates hot air evenly for faster, more consistent baking and roasting.

Burner Specifications

Power Burner

15,000 BTU - Rapid boiling, stir-frying, searing

Medium Burner

9,500 BTU - General cooking, sautéing, frying

Simmer Burner

5,000 BTU - Delicate sauces, melting, simmering

Dual Burner

12,000 BTU - Oval cookware, griddles, large pans

Standard Burner

9,000 BTU - Everyday cooking, medium heat tasks

Oven Burner

18,000 BTU - Main oven heating element

Troubleshooting

Problem Possible Cause Solution
Burner won't light Gas supply off, clogged burner ports, faulty igniter Check gas supply, clean burner ports, check igniter spark
Uneven flame Clogged burner ports, improper air mixture Clean burner thoroughly, adjust air shutter if accessible
Yellow or orange flame Insufficient air, dirty burner Clean burner, ensure proper ventilation, call technician if persistent
Gas odor Gas leak, improper connection Turn off gas immediately, check connections with leak detector, call technician
Oven not heating Igniter failure, gas valve issue, thermostat problem Check igniter glow, ensure gas supply, contact service if needed
Burner clicks continuously Wet igniter, faulty spark module Dry igniter area, check for moisture, replace module if needed

Error Codes

  • F1: Oven temperature sensor failure - Contact service center
  • F2: Oven over temperature - Allow to cool, check for obstructions
  • F3: Oven igniter failure - Check igniter, contact service if needed
  • F4: Gas supply issue - Check gas valve and supply
  • F5: Control board error - Power cycle, contact service if persistent
  • F7: Door lock mechanism error - Check door alignment and lock

Manual Downloads

Current Model Manuals

WGS560SLX

30" Gas Range with Convection

WGS750SLX

30" Smart Gas Range

WGS340SLX

30" Basic Gas Range

WGS890SLB

30" Black Gas Range

Popular Previous Models

WGG745S0FS

30" Front Control Gas Range

WGG53S1KS

30" Gas Range with Griddle

WGG55S0FW

30" White Gas Range

WGG64S0BS

30" Gas Range with Air Fry

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.