Whirlpool Dishwasher Parts Manual

Parts Catalog & Replacement Guide

Replacement Parts Catalog

Installation Guide

Tools Needed:

  • Adjustable wrench
  • Screwdrivers (flat and Phillips)
  • Pliers
  • Tape measure
  • Level
  • Pipe wrench

Step-by-Step Installation

  1. Choose Installation Location: Select a location near necessary plumbing and electrical connections under countertop or as built-in unit.
  2. Remove Shipping Materials: Remove all shipping bolts, brackets and packaging materials from the dishwasher.
  3. Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new hoses and ensure proper sealing.
  4. Connect Drain Hose: Route the drain hose into garbage disposal or sink drain with high loop to prevent backflow.
  5. Electrical Connection: Connect to a properly grounded 120V, 60Hz, 15A dedicated circuit. Follow local electrical codes.
  6. Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
  7. Secure Installation: Secure dishwasher to countertop or adjacent cabinets using mounting brackets.
  8. Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Warning: All installations must be performed by a qualified installer to ensure proper operation and maintain warranty coverage.

Specifications

Model Series WDT970SAHZ
Type Built-In Dishwasher
Color Stainless Steel / Black
Place Settings 16 Place Settings
Noise Level 44 dBA
Control Type Touch Controls with LED Display
Energy Rating ENERGY STARĀ® Certified
Water Consumption 2.9 gallons per cycle
Power Requirements 120V, 60Hz, 15A
Dimensions (HxWxD) 34.5 x 23.75 x 24.5 inches
Weight 105 lbs
Wash Cycles 6 Wash Cycles

Warranty Information

  • Full Warranty: 1 year parts and labor
  • Motor Warranty: 5 years on wash motor
  • Rack Warranty: 10 years on stainless steel tub
  • Additional Coverage: Optional extended warranty available

For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com

Key Features

Third Level Rack

Extra rack for silverware, utensils, and small items, providing more loading flexibility and capacity for up to 16 place settings.

Sensor Cycle

Automatically adjusts wash time and temperature based on soil level, ensuring optimal cleaning while saving water and energy.

Power Scour

High-pressure spray jets target tough, baked-on foods with concentrated cleaning power for spotless results.

Steam Clean

Steam technology helps to remove tough, dried-on foods while sanitizing dishes for hygienically clean results.

Quiet Operation

Sound insulation and efficient motor design provide quiet operation at only 44 dBA, quieter than most conversations.

Soil Sensor

Detects soil levels in the wash water and adjusts cycle time and water usage accordingly for efficient cleaning.

Wash Cycles Explained

Normal Wash

For everyday cleaning of normally soiled dishes with optimal water and energy use

Heavy Wash

Intensive cleaning for pots, pans, and heavily soiled dishes with extra hot water

Light Wash

Quick cycle for lightly soiled dishes or glassware with reduced water and energy use

Rinse Only

Rinses dishes to prevent drying of food particles until a full load is ready

Sanitize

High-temperature wash that eliminates 99.9% of bacteria for hygienically clean dishes

Delay Start

Delays start time up to 24 hours to run during off-peak energy hours

Troubleshooting

Problem Possible Cause Solution
Dishwasher won't start Power issue, door not closed properly, child lock engaged Check power supply, ensure door is latched completely, check child lock
Poor cleaning results Overloading, wrong detergent, clogged spray arms Reduce load size, use correct detergent, clean spray arms
Water not draining Drain hose clogged, garbage disposal blocked Check drain hose for obstructions, clean garbage disposal
Leaking water Door not sealed, overfilling, loose connections Check door seal, ensure proper detergent amount, check connections
Unusual noises Foreign objects in pump, spray arm hitting dishes Check for foreign objects, rearrange dishes properly
Dishes not drying Rinse aid empty, heating element faulty Refill rinse aid, check heating element

Error Codes

  • F1: Water supply issue - Check water supply and inlet valve
  • F2: Drain issue - Check drain hose and pump
  • F3: Temperature sensor issue - Check temperature sensor
  • F4: Water leak detected - Check for leaks and water supply
  • F5: Door switch issue - Check door latch mechanism
  • F6: Motor control issue - Contact service center
  • F7: Heater issue - Check heating element
  • F8: Communication error - Reset dishwasher

Manual Downloads

Current Model Manuals

WDT970SAHZ

Top Control Dishwasher

WDF760SAHZ

Front Control Dishwasher

WDT750SAHZ

Stainless Steel Dishwasher

WDT540SAHZ

Black Stainless Dishwasher

Popular Previous Models

WDT720PADM

Stainless Steel Interior

WDF760PADM

Quiet Series Dishwasher

WDT910SAYM

Premium Dishwasher

WDF760SAYM

Energy Star Dishwasher

Note: For models not listed here, please visit the Whirlpool Support Website for complete documentation.