Installation Guide
Tools Needed:
- Adjustable wrench
- Level
- Screwdrivers (flat and Phillips)
- Pliers
- Tape measure
- Pipe wrench
Step-by-Step Installation
- Choose Installation Location: Select a location near kitchen plumbing and electrical connections on a solid, level floor under countertop.
- Remove Shipping Materials: Remove all shipping bolts, brackets and packaging materials from the dishwasher.
- Connect Water Supply: Connect hot water supply line to the water inlet valve. Use only new braided stainless steel hoses.
- Connect Drain Hose: Route the drain hose into sink drain or garbage disposal with a high loop to prevent backflow.
- Electrical Connection: Connect to a properly grounded 120V, 60Hz, dedicated circuit. Do not use an extension cord.
- Level the Dishwasher: Adjust the leveling legs to ensure the dishwasher is level from front to back and side to side.
- Secure to Countertop: Attach mounting brackets to underside of countertop to prevent tipping.
- Test Run: Run the dishwasher through a complete cycle to check for leaks and proper operation.
Specifications
| Model Series | WDT750SAKZ |
| Type | Built-In Dishwasher |
| Color | Stainless Steel / Black |
| Place Settings | 14 Place Settings |
| Noise Level | 46 dB |
| Control Type | Touch Controls with LED Display |
| Energy Rating | ENERGY STAR® Certified |
| Water Consumption | 2.9 gallons per cycle |
| Power Requirements | 120V, 60Hz, 15A |
| Dimensions (HxWxD) | 34.5 x 23.8 x 24 inches |
| Weight | 85 lbs |
| Wash Cycles | 6 Wash Cycles |
Warranty Information
- Full Warranty: 1 year parts and labor
- Extended Warranty: 10 years on stainless steel tub
- Additional Coverage: Optional extended warranty available
For warranty service, contact Whirlpool Customer Service at 1-800-253-1301 or visit Whirlpool.com
Key Features
Third Level Rack
Extra rack for utensils and small items, providing more loading flexibility and maximizing capacity for up to 14 place settings.
Sensor Cycle
Automatically adjusts water temperature, wash time, and detergent amount based on soil level, ensuring optimal cleaning while saving energy.
Power Scour®
High-pressure spray jets target tough, baked-on foods with 10X more cleaning power than standard wash arms.
Clean Water Wash System
Filters and reuses water throughout the cycle, using less water while maintaining cleaning performance.
Quiet Partner® Sound Insulation
Advanced insulation technology reduces operating noise to just 46 dB, quieter than most conversations.
Steam Clean Option
Steam technology helps to remove tough, dried-on foods and reduce spotting on dishes, glassware, and cookware.
Wash Cycles Explained
Normal Wash
For everyday cleaning of normally soiled dishes with dried-on food
Heavy Wash
For pots, pans, and dishes with baked-on or heavy food soils
Light Wash
For lightly soiled dishes or quick rinse of dishes before washing
Rinse Only
Rinses dishes without detergent to prevent drying of food particles
Sensor Wash
Automatically adjusts cycle based on soil level detection
Sanitize
High-temperature wash that reduces 99.9% of bacteria
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Dishwasher won't start | Power issue, door not closed properly, child lock engaged | Check power supply, ensure door is latched completely, check child lock |
| Poor cleaning results | Overloading, wrong detergent, clogged spray arms, low water temperature | Load properly, use dishwasher detergent, clean spray arms, ensure hot water supply |
| Water not draining | Drain hose clogged or kinked, garbage disposal clogged | Check drain hose for obstructions, clean disposal, check drain pump |
| Leaking water | Door not sealed, overfilling, loose connections, worn door gasket | Check door seal, ensure proper detergent amount, check connections, replace gasket |
| Unusual noises | Foreign objects in pump, spray arm hitting dishes, worn wash motor | Check for foreign objects, rearrange dishes, contact service if motor noise |
| Dishes not drying | Rinse aid empty, water temperature too low, plastic items | Refill rinse aid, ensure hot water supply, use heated dry cycle |
Error Codes
- F1: Water supply issue - Check water supply and inlet valve
- F2: Drain issue - Check drain hose and pump
- F3: Temperature sensor issue - Contact service center
- F4: Water leak detected - Check for leaks and water supply
- F5: Door not closed properly - Ensure door is fully closed
- F6: Motor control issue - Contact service center
Manual Downloads
Current Model Manuals
WDT750SAKZ
14-Place Setting Dishwasher
WDT730PAHZ
Stainless Steel Dishwasher
WDF540PADM
Black Stainless Dishwasher
WDT710PAHZ
White Dishwasher
Popular Previous Models
WDF750SAKM
15-Place Setting Dishwasher
WDT970SAJZ
Smart Dishwasher
WDF760SADM
Third Rack Dishwasher
WDT720PADM
Quiet Series Dishwasher