The Whirlpool WRS325SDHB01 is a 25 cubic foot French Door Refrigerator with an external water and ice dispenser, adjustable gallon door bins, spill-proof glass shelves, humidity-controlled crispers, a full-width freezer drawer, and LED lighting. It features Accu-Chill™ temperature management, EveryDrop™ water filtration, and is ENERGY STAR® certified. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: French doors, external ice and water dispenser, adjustable interior features, and electronic controls.
| Feature | Description |
|---|---|
| External Dispenser | Provides chilled water and ice (cubed or crushed) without opening the doors |
| Accu-Chill™ Temperature Management | Monitors and adjusts cooling to maintain consistent temperatures |
| Adjustable Gallon Door Bins | Can be repositioned to accommodate large containers and gallon jugs |
| Spill-Proof Glass Shelves | Tempered glass shelves contain spills for easier cleaning |
| Humidity-Controlled Crispers | Preserve freshness of fruits and vegetables with adjustable humidity seals |
| Full-Width Freezer Drawer | Provides wide, easy access to frozen items |
| LED Interior Lighting | Energy-efficient, bright lighting for better visibility |
| EveryDrop™ Water Filtration | Reduces 99% of lead and other contaminants (Filter 4) |
| ENERGY STAR® Certified | Meets strict energy efficiency guidelines |
| Door Alarm | Audible alert sounds if either refrigerator door is left ajar |
Unpack and inspect contents. Ensure proper clearance for doors and ventilation.
WARNING! This appliance is heavy. Use two or more people to move and install it to avoid back injury or damage to floors. Ensure the water line connection is tight to prevent leaks.
After installation, allow the refrigerator to cool for 24 hours before adding food.
CAUTION! Do not load large quantities of unfrozen food at once. Allow the appliance to stabilize at the set temperatures first.
The control panel is located on the exterior dispenser face.
Primary Controls: - Temp Controls: Separate buttons for Fridge and Freezer. Press to cycle through temperature settings. - Filter Reset: Press and hold for 3 seconds after replacing the water filter. - Light/Control Lock: Press and hold for 3 seconds to lock/unlock the control panel and dispenser pad. - Ice Type Selector: Button to choose between cubed or crushed ice.
Settings & Features: - Temperature Alarm: An icon will flash if temperatures rise above safe levels. - Door Alarm: Sounds if a refrigerator door is open for more than 5 minutes. Press any button to silence. - Sabbath Mode: For religious observance, disables interior lights, dispenser, and alarms while maintaining temperature. (Consult detailed manual for activation steps).
For proper operation of the ice maker and water dispenser, a water line connection is required.
Tip: It is recommended to use the EveryDrop™ water filter for best performance and to reduce contaminants.
The external dispenser provides chilled water and ice.
WARNING! Do not use a glass that is cracked or chipped. Do not allow children to dispense ice without supervision, as it can be a choking hazard.
Organize food to maximize freshness and energy efficiency.
Unplug the refrigerator before cleaning (except for routine exterior cleaning).
CAUTION! Never use harsh chemicals, abrasives, or ammonia on any surface. Do not clean glass shelves with hot water when they are cold, as they may break.
This appliance complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. This device complies with relevant safety standards, including UL 250. For disposal, this product contains materials that may be recyclable. Consult your local recycling authority. The refrigerant used is R-600a (isobutane), a flammable gas. Service must be performed by a qualified technician.
For support, visit www.whirlpool.com or contact Whirlpool Customer Service at 1-800-253-1301.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Refrigerator is not cooling | Power issue, controls set incorrectly, poor ventilation | Ensure unit is plugged in and outlet has power. Check temperature settings. Ensure coils are clean and there is adequate clearance around the unit. |
| Water dispenser not working | Water supply off, kinked line, clogged filter | Ensure water supply valve is open. Check for kinks in the line. Replace the water filter if needed. Flush the system. |
| Ice maker not producing ice | Ice maker turned off, low water pressure, freezer too warm | Ensure ice maker feeler arm is in the DOWN (ON) position. Check water line connection and pressure. Ensure freezer temperature is at 0°F (-18°C). |
| Dispenser is leaking water | Loose water connection, cracked tray | Check and tighten the water line connection at the valve. Inspect the drip tray for cracks and replace if necessary. |
| Unusual noises | Normal operation, unit not level, items vibrating | Popping/cracking sounds from contraction/expansion are normal. Ensure refrigerator is level front-to-back and side-to-side. Check for items touching the back wall inside. |
| Control panel is unresponsive | Control Lock is on, power issue | Press and hold the "Light/Lock" button for 3 seconds to unlock. Check household circuit breaker. |
Reset: Unplug the refrigerator for 5 minutes, then plug it back in to perform a soft reset.
Service: For repairs, contact an authorized Whirlpool service provider. Do not attempt to repair the sealed refrigerant system yourself.