The Whirlpool WRS325SDHZ01 is a 25 cubic foot side-by-side refrigerator with ice and water dispenser, adaptive defrost, humidity-controlled crispers, gallon door bins, adjustable spill-proof glass shelves, and LED lighting. It features electronic temperature controls, a factory-set energy-saving mode, and is designed for built-in or freestanding installation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Side-by-side doors, external ice and water dispenser, electronic controls, humidity-controlled crispers, adjustable shelves, and LED interior lighting.
| Feature | Description |
|---|---|
| Ice & Water Dispenser | Dispenses cubed ice, crushed ice, and chilled water |
| Adaptive Defrost System | Reduces energy use by defrosting only when needed |
| Humidity-Controlled Crispers | Preserves freshness of fruits and vegetables |
| Gallon Door Bins | Store large containers like milk jugs |
| Adjustable Spill-Proof Shelves | Glass shelves contain spills; can be repositioned |
| LED Interior Lighting | Bright, energy-efficient lighting |
| Electronic Temperature Controls | Separate controls for fridge and freezer |
| Factory Energy-Saving Mode | Optimized default settings for efficiency |
| Door Alarm | Sounds if door is left open |
| Water Filter Indicator Light | Alerts when filter needs replacement |
Unpack and inspect contents. Ensure proper location and clearances.
WARNING! Heavy appliance; use two people for moving. Ensure water connection is tight to prevent leaks.
After installation, complete initial setup.
CAUTION! Do not use extension cord. Ensure refrigerator is properly leveled.
Electronic controls located on dispenser panel.
Display Panel: Temperature settings, filter status, door alarm, lock controls.
Temperature: Set fridge (34°F to 46°F) and freezer (-6°F to 6°F) independently. Dispenser: Select cubed/crushed ice or water. Filter Reset: Press and hold FILTER button for 3 seconds after replacement. Door Alarm: Can be disabled temporarily. Control Lock: Prevents accidental setting changes. Energy Saver: Default mode; can be turned off in humid conditions to prevent condensation.
For ice and chilled water.
Tip: First use may take 24 hours for ice production. Discard first few batches.
Organize for optimal freshness.
WARNING! Do not overload shelves. Ensure air circulation around food items.
Unplug before cleaning interior. Use mild detergent and warm water; avoid abrasives.
Exterior: Clean with soft cloth. Interior: Remove shelves and bins to wash. Dispenser: Wipe with damp cloth. Condenser coils: Vacuum every 6 months.
CAUTION! Do not use harsh chemicals. Never steam clean.
UL Listed. Meets DOE energy standards. This product contains fluorinated greenhouse gases. For disposal, contact authorized service. Copyright © Whirlpool Corporation. All trademarks owned by Whirlpool, U.S.A. For support, visit www.whirlpool.com or contact 1-800-253-1301.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Refrigerator not cooling | Power/controls | Check power cord; ensure controls are set correctly; allow 24 hours after setup. |
| Dispenser not working | Water supply/filter | Ensure water is connected and on; check for kinked line; replace filter if clogged. |
| Ice maker not making ice | Temperature/arm position | Freezer must be at 0°F; ensure ice maker arm is in down position. |
| Water leaking | Connections/defrost drain | Tighten water line connections; check defrost drain for clog. |
| Excessive frost in freezer | Door seal/warm food | Check door seal for gaps; ensure food is cooled before storing. |
| Loud noises | Leveling/objects nearby | Ensure refrigerator is level; check for items touching walls. |
Reset: Unplug for 5 minutes, then plug back in.
Service: 1-800-253-1301; www.whirlpool.com