The Whirlpool Model WRS325FDAM04 is a 25 cubic foot French Door Refrigerator with an external ice and water dispenser, adaptive defrost, humidity-controlled crispers, gallon door bins, spill-proof glass shelves, and a fingerprint-resistant stainless steel finish. It features Accu-Chill™ temperature management, EveryDrop™ filtration, and LED lighting. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: French doors, external ice and water dispenser, adaptive defrost system, humidity-controlled crispers, adjustable gallon door bins, spill-proof glass shelves, and LED interior lighting.
| Feature | Description |
|---|---|
| External Dispenser | Provides ice and filtered water without opening the doors |
| Accu-Chill™ Temperature Management | Maintains consistent temperatures for food freshness |
| EveryDrop™ Filtration | Reduces contaminants for cleaner water and ice |
| Humidity-Controlled Crispers | Preserve fruits and vegetables longer |
| Spill-Proof Glass Shelves | Contain spills for easier cleaning |
| Adjustable Gallon Door Bins | Store large containers like milk jugs |
| Adaptive Defrost | Optimizes defrost cycles for efficiency |
| Fingerprint-Resistant Finish | Stainless steel exterior that resists smudges |
| LED Lighting | Energy-efficient, bright interior illumination |
| Door Alarm | Alerts if doors are left ajar |
Unpack and inspect contents. Ensure location meets clearance requirements.
WARNING! Refrigerator is heavy; use two people to move. Ensure water connection is tight to prevent leaks.
After installation, allow 24 hours for the refrigerator to cool before adding food.
CAUTION! Do not overload shelves. Allow cold air to circulate freely.
Control Panel located on the exterior dispenser face.
Buttons: LOCK (to lock/unlock controls), TEMPERATURE (adjust fridge/freezer), FILTER RESET (reset filter indicator), LIGHT (control interior LED), ALARM (door ajar alarm).
Temperature Settings: Fresh Food (34°F to 46°F), Freezer (-5°F to 5°F). Use TEMPERATURE button and arrow keys to adjust. Filter Indicator: Lights when filter needs replacement (approx. every 6 months). Reset by holding FILTER RESET for 3 seconds. Door Alarm: Sounds if door is open for more than 5 minutes. Press ALARM to silence.
Provides ice (crushed or cubed) and filtered water.
Tip: For first use or after filter change, flush system by dispensing 2 gallons of water.
Optimize organization for freshness and convenience.
WARNING! Do not place hot food directly into refrigerator. Allow to cool first.
Unplug before cleaning interior. Use mild soap and water; avoid abrasive cleaners.
Exterior: Wipe with a damp cloth and dry. Use stainless steel cleaner for the finish if needed.
Interior: Remove shelves and bins. Wash with warm, soapy water. Rinse and dry.
Dispenser: Wipe area with a clean, damp cloth.
Condenser Coils: Vacuum every 6 months for efficiency (located at rear or bottom front).
CAUTION! Do not use sharp objects to remove ice. Never use hot water to defrost.
UL Listed. Meets U.S. Department of Energy energy efficiency standards. Copyright © Whirlpool Corporation. All trademarks owned by Whirlpool, U.S.A. For support, visit www.whirlpool.com or contact 1-800-253-1301.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Refrigerator not cooling | Power/controls | Ensure unit is plugged in and outlet works. Check temperature settings. |
| Water dispenser not working | Filter/water supply | Replace water filter. Ensure water supply valve is open. |
| Ice maker not making ice | Freezer temp/arm position | Ensure freezer is at 0°F. Check that ice maker arm is in the down (ON) position. |
| Dispenser leaking | Loose connections | Check water line connections at valve and filter housing. Tighten if needed. |
| Unusual noise | Leveling/fan obstruction | Ensure refrigerator is level. Check for items touching the rear wall or fan. |
| Door alarm sounds | Door ajar | Check that all doors are fully closed. Clear any obstructions in door seals. |
Reset: Unplug for 5 minutes, then plug back in to reset control board.
Service: 1-800-253-1301; www.whirlpool.com